Справочник Пользователя для Mitsubishi Electronics Q64TCTTBWN
307
CHAPTER 7 PROGRAMMING
7
7.2 When U
sing the Mo
dule in a Stand
ard System
Configuration
7.2.1 Stan
dard contr
ol (
such as auto tun
such as auto tun
ing, self-tuning, and
erro
r code rea
d)
7.2
When Using the Module in a Standard System
Configuration
Configuration
This section describes the following program examples.
7.2.1
Standard control (such as auto tuning, self-tuning, and error
code read)
code read)
This section describes the program example for operations such as the auto tuning, self-tuning, and error code read.
(1) System configuration
The following figure shows the system configuration for operations such as the auto tuning, self-tuning, and error
code read.
code read.
When the Q64TCTTBWN or the Q64TCRTBWN is used, the I/O assignment is the same as that of the system configuration
shown above.
shown above.
• Slot 0: Empty 16 points
• Slot 1: Intelligent 16 points
• Slot 2: Input 64 points
• Slot 3: Output 64 points
• Slot 1: Intelligent 16 points
• Slot 2: Input 64 points
• Slot 3: Output 64 points
Control mode
Overview of the program example
Reference
Standard control
This is a program example for operations such as the auto tuning, self-tuning, and error code
read.
read.
This is a program example where the peak current suppression function and the simultaneous
temperature rise function are used for the control.
temperature rise function are used for the control.
Heating-cooling control
This is a program example for the heating-cooling control.
QY42P (Y60 to Y9F)
QX42 (X20 to X5F)
QCPU
Q64TCTTN (X/Y10 to X/Y1F)
16 empty points
Type-K thermocouple
0 to 1300
Heater
Object to be controlled