Справочник Пользователя для Interphase Tech iSPAN

1. In the Card field, if more than one physical iSPAN-

Serial WAN adapter is installed, select the physical 
adapter to be used by the channel. 

2. In the Network field, if more than one Frame Relay 

network configuration has been created for use by the 
NDIS driver, select the network configuration to be 
used by this channel.

3. If you need to create, edit, or remove a network 

configuration to be used for driver connections, do the 
following:

a. Click the Properties button in the Port section of the 

Channel properties dialog box. 

b. On the Frame Relay protocol properties dialog box, 

configure the Frame Relay network properties to use 
with this channel. For instructions, see 

All Frame Relay network configurations created in 
this dialog box are available for use by all of the 
adapter’s NDIS channels and SNA link services.

c. Click OK to save the Frame Relay protocol 

properties and return to the Channel properties 
dialog box.