Справочник Пользователя для Interphase Tech iSPAN

If one or both of the protocols are selected but 
unavailable, the protocol is already used by a defined 
channel. 

If one or both protocols are neither selected nor 
available, the protocols might not be installed. To install 
the network protocols do the following:

a. Close the NDIS Driver Properties dialog box, and 

then close the NDIS Driver Setup dialog box. 

b. On the Network Adapters dialog box, select the 

Protocols tab.

c. If the desired protocols (IP or IPX/SPX) are not 

listed, click Add and follow the onscreen 
instructions. Then repeat steps 

 through 

.

6. When you finish setting up logical adapter network 

properties, click OK to save the properties and return to 
the NDIS Driver Setup dialog box.