Справочник Пользователя для Mitsumi electronic NZ2GF-ETB
54
6.2.3
Mounting the modules on a DIN rail
The Ethernet adapter module must be mounted on a DIN rail.
The procedure for mounting the Ethernet adapter module on a DIN rail is shown below.
The procedure for mounting the Ethernet adapter module on a DIN rail is shown below.
(1) Mounting procedure
1.
Pull down all of the DIN rail hooks on the back of the
Ethernet adapter module.
Pull it until a click sound is heard.
Pull it until a click sound is heard.
2.
Hang the upper tabs of the Ethernet adapter module
on the DIN rail, and push the module in position.
3.
Lock the DIN rail hooks of the Ethernet adapter
module to secure it in position.
Push each hook until a click sound is heard.
If you cannot reach the hooks, use a tool such as a
screwdriver.
Push each hook until a click sound is heard.
If you cannot reach the hooks, use a tool such as a
screwdriver.
4.
Loosen the screw on the DIN rail stopper.