Справочник Пользователя для Intermate LX T-04
A p p e n d i c e s
I n t e r m a t e L X T - 0 4
57
C. Operating the LX T-04
The SYSTEM indicator
This indicator (green) is lit when the Intermate LX T-04 is connected to your
IBM system. It can also flash under the following conditions:
IBM system. It can also flash under the following conditions:
Flash during a few seconds at power up.
Flash in Test Mode. Described later in this chapter.
Rapid flash during test function execution and during flash loading
of new software.
of new software.
Note:
If the power up flashing continues, a hardware error has occurred.
Contact your dealer/ distributor.
Contact your dealer/ distributor.
The Address Switch
The ten-position address switch is used to set the device address for the
Intermate LX T-04. It is also used to set start conditions and to select and
execute test functions during operation.
Intermate LX T-04. It is also used to set start conditions and to select and
execute test functions during operation.
Start Conditions
The action when the Intermate LX T-04 is switched on is determined by the
setting of the address switch, as follows:
setting of the address switch, as follows:
Pos. Description
0 - 6
Divice address in normal print operation.
7
Reserved.
8
Select IBM 4214 Printer emulation,
9
Perform a test printout.