Справочник Пользователя для Multi-Tech Systems ISIHP-4SD

Returns TA to online mode from the online command mode. When TA makes a

data connection, it enters online data mode. The TA typically remains in this

mode until it receives an escape sequence or until the call ends. When it

detects an escape sequence, the TA enters online command mode, where it can

accept AT commands while retaining the online connection. To return the TA

to online mode from the online command mode, enter the command ATO and

press ENTER.

@CONFIG Start ConfigMenu

Values: none

Default: none

Starts TA’s internal configuration utility, which allows you to customize the

configuration for your application. Enter the command while in terminal

mode.

S-registers are sections of memory in which values are stored that affect

how the TA operates. S-registers are so-called because each has a name that

begins with the character S. Use the S command to assign a value to or to

read the current value of an S-register. To assign a value to an S-register,

use the command Sr=n, in which r is the register number, and n is the value

you want to assign to the register, e.g., S7=45. To read an S-register value,

use the command Sr?, in which r is the register number, e.g., ATS7?.

S0

Rings until answer

S1

Ring count

S2

Escape character

S3

Carriage return character

S4

Line feed character

S5

Backspace character

S7

Wait for connection (abort timer)

S8

Pause Time for Comma

S10

DCD Drop Time

S25

DTR Drop Time