Справочник Пользователя для Multi-Tech Systems ISIHP-4SD

12. After the bindings have been reviewed and stored,  the message

below appears, click Yes.

After re-booting, the ISI Cards icon appears in the Control Panel.

icon

 You are now ready to configure the terminal adapter. See the

section,“Configuring the Terminal Adapter,” on page 49.

Unlike many modem products, the ISIHP has no DIP switch for I/O

addresses and no jumper to determine the IRQ code.  The input/output

address and the interrupt request code (IRQ)  for the ISIHP  are

assigned automatically during driver installation.  During any

subsequent re-cofiguring of your PC, you may need to know the

assigned  I/O address and IRQ code.  To determine the I/O address

and IRQ assigned to the ISIHP: