Справочник Пользователя для Allied Telesis AT-2973T

AT-2973SX, AT-2973T, and AT-2973T/4 NetExtreme II Family Adapters Installation and User’s Guide

149

This does not include an unattended installation when performed 
from a CD-ROM. 

The path shown in OemPnpDriversPath can be appended with the 
path to other applicable drivers.

For an unattended installation, place the Broadcom NetXtreme II driver 
files in the $OEM$\$1\Drivers\NIC directory. For Sysprep, the drivers are 
located in Drivers\NIC at the root of the system drive. The Broadcom 
NetXtreme II driver files are listed below according to the operating system 
to be installed: 



Windows Server 2003 (ia32): bxvbd.inf, bxvbdx.sys, bxvbd.cat, 
bxnd.inf, bxnd.cat, bxnd52x.sys, bxndcox.dll, bxdiag.cat, bxdiag.inf, 
bxdiagx.sys, wdfcoinstaller01005.dll, and wUDFUpdate_01005.dll 



Windows Server 2003 (x64): bxvbd.inf, bxvbda.sys, bxvbd.cat, 
bxnd.inf, bxnd.cat, bxnd52a.sys, bxndcoa.dll, bxdiag.cat, bxdiag.inf, 
bxdiaga.sys, wdfcoinstaller01005.dll, and wUDFUpdate_01005.dll 

When applying network properties through an answer file for a NetXtreme 
II device where the PnP iD is the identifier, as follows: 

For a BCM5709C NetXtreme II GigE - InfId = 
"b06bdrv\l2nd&pci_163914e4" 

For a BCM5709S Netxtreme II GigE - InfId = 
"b06bdrv\l2nd&pci_163a14e4" 

Currently, the PCI location (PCI bus, device, and function numbers) 
method is not supported for the NetXtreme II device as an identifier or the 
adapter in the answer file due to a limitation with the Windows operating 
system.