Справочник Пользователя для Acer Altos R520

113

To set a Administrator/User password

1

Use the up/down keys to highlight a password parameter (Set 
Administrator Password or Set User Password) then press Enter. 

A password box will appear.

2

Type a password then press Enter. 

The password may consist of up to seven alphanumeric characters 
(A-Z, a-z, 0-9). 

3

Retype the password to verify the first entry then press Enter 
again. 

After setting the password, the system automatically sets the 
chosen password parameter to Installed. 

To change the Administrator/User password

1

Use the up/down keys to highlight either change password 
parameters (Change Administrator Password or Change User 
Password) then press Enter. 

2

Type the original password then press Enter. 

3

Type a new password then press Enter. 

4

Retype the password to verify the first entry then press Enter 
again.

To remove the User password

1

Use the up/down keys to highlight the Clear User Password 
parameter then press Enter.

2

Enter the current password then press Enter.

3

Press Enter twice without entering anything in the new and 
confirm password fields. 

After doing this, the system automatically sets the User password 
parameter to Not Installed.

Front Panel 
Lockout

When Enabled, the front panel power 
and reset buttons will be locked. The 
power and reset operation must be 
controlled via system management 
interface. 

Enabled