Справочник Пользователя для Acer Altos R520

 Appendix B: RAID configuration

170

2

Select New Configuration from the Configuration menu and 
select Yes to continue. An array selection menu displays the 
devices connected to the current controller.

3

Press the arrow keys to choose specific physical drives and press 
spacebar to associate the selected drive with the current array. The 
indicator for selected drive change from READY to ONLINE.

4

Add 2 drives to current array and press Enter to finish creating 
current array.

5

Press Enter again to select array to configure.

6

Press spacebar to select the array and press F10 to configure the 
logical drive

7

The default RAID level for 2 disk drives is RAID1. Just select Accept 
to use the default setting and press Enter to return to the ARRAY 
SELECTION MENU.

8

Press Enter to end the array configuration.

9

Select Yes to Save Configuratio and press any key to return to 
the Configure menu.

Initial RAID Volume

1

Press Esc to return to the Management Menu.

2

Select Initialize from Management menu. All logical drives should 
be listed under Logical Drives.

3

Press spacebar to select drives for initialization. The selected drive 
will be shown in yellow.

4

After selecting the drives, press F10 and select Yes to start the 
initialization process.

5

When initialization is complete, press any key to continue.

6

Press Esc to return to the Management Menu.

Save and Exit Embedded RAID II Configuration Utility

1

When RAID configuration and initialization is complete, press Esc 
in the Management Menu and select Yes to exit the Embedded 
RAID Configuration Utility.

2

Press Ctrl+Alt+Del to reboot the server.