Справочник Пользователя для Acer R300
109
Installing cage nuts
Cage nuts are used to secure systems and other components to the
vertical rails in the rack.
vertical rails in the rack.
To install cage nuts:
1
Insert the lower lip of the cage nut over the bottom of the
opening at the back of a rail.
opening at the back of a rail.
2
Insert the small end of the cage-nut installation tool through the
opening in front of the rail and hook the tool over the top lip of
the M6 cage nut as shown below.
opening in front of the rail and hook the tool over the top lip of
the M6 cage nut as shown below.
Note: If the rack’s rail has a rounded screw hole you must use the
M610 cage nut.
M610 cage nut.
3
Push in the cage nut while rotating the tool up and pulling the
tool back toward you until the top lip of the cage nut snaps into
position.
tool back toward you until the top lip of the cage nut snaps into
position.
4
Repeat this process to install the other cage nuts in their
appropriate locations.
appropriate locations.
aa r300.book Page 109 Tuesday, March 4, 2003 9:39 AM