Справочник Пользователя для D-Link DSR-1000

Unified Services Router

User Manual



Service: ANY means all traffic is affected by this rule. For a specific

service the drop down list has common services, or you can select a

custom defined service.



Action & Schedule: Select one of the 4 actions that this rule defines:

BLOCK always, ALLOW always, BLOCK b y schedule otherwise

ALLOW, or ALLOW by schedule otherwise BLOCK . A schedule must

be preconfigured in order for it to be available in the dropdown list to

assign to this rule.

 Source & Destination users: For each relevant category, select the users

to which the rule applies:



Any (all users)



Single Address (enter an IP address)



Address Range (enter the appropriate IP address range)

 Log: traffic that is filtered by this rule can be logged; this requires

configuring the router‘s logging feature separately.

 QoS Priority: Outbound rules (where To Zone = insecure WAN only)

can have the traffic marked with a QoS priority tag. Select a priority

level:



Normal-Service: ToS=0 (lowest QoS)



Minimize-Cost: ToS=1



Maximize-Reliability: ToS=2



Maximize-Throughput: ToS=4

 Minimize-Delay: ToS=8 (highest QoS)

Inbound rules can use Destination NAT (DNAT) for managing traffic from the WAN.

Destination NAT is available when the To Zone = DMZ or secure LAN.

 With an inbound allow rule you can enter the internal server address

that is hosting the selected service.

 You can enable port forwarding for an incoming service specific rule

(From Zone = WAN) by selecting the appropriate checkbox. This will

allow the selected service traffic from the internet to reach the

appropriate LAN port via a port forwarding rule.

 Translate Port Number: With port forwarding, the incoming traffic to

be forwarded to the port number entered here.