Справочник Пользователя для Digi 90031300
Software Installation
37
3. Press the ENTER key to configure that host adapter’s T1 Modem Banks. The “#” field in the example screen
shown in Figure 18 indicates the number (beginning with 0) of the T1 Modem Bank you will be configuring.
Figure 18
T1 Modem Bank Configuration Screen
4. Use the arrow keys to select the field you wish to change, and press the ENTER key to view a list of the options
that are available for that field. Use the arrow keys to select the option you wish, and then press the ENTER key
again to set the option for that field.
again to set the option for that field.
If you select SHORT for the “Span”, the “Length” field is in feet (0 to 655), and the “EQ” field
is not applicable. If the span is LONG, then the “Length” field is in dB, and the “EQ” field is
applicable.
is not applicable. If the span is LONG, then the “Length” field is in dB, and the “EQ” field is
applicable.
5. Once the desired settings have been selected, they must be applied to the T1 Modem Bank. Select the “Apply
Config” field. A pop up box will indicate the success or the failure of implementing the setting assigned for each
parameter.
parameter.
6. When you exit the program, you will be asked if you wish to save the current configuration. (If you applied all
the settings, this question is unnecessary). Responding “Yes” will save all parameters to all T1 Modem Banks.