Справочник Пользователя для Digi 90031300
Component Removal and Installation
71
Figure 24
Quick Manager Modem Revision Screen
2. There are two captive fasteners that secure the modem card to the chassis. To remove the modem card, use a
flathead screwdriver to loosen the captive fasteners on the malfunctioning modem card. Pull the ejector levers,
then slide the malfunctioning modem card out of the chassis.
then slide the malfunctioning modem card out of the chassis.
Modem Card Installation/Replacement
This section describes how to install an additional modem card or to replace a modem card that has been removed.
Modem cards can be “hot swapped”, meaning that no system reset is needed after a modem card is pulled out and/or
installed. This does not mean that modem boards should be moved from slot to slot without cause, since the
motherboard senses and stores information regarding a modem board’s correct location.
Modem cards can be “hot swapped”, meaning that no system reset is needed after a modem card is pulled out and/or
installed. This does not mean that modem boards should be moved from slot to slot without cause, since the
motherboard senses and stores information regarding a modem board’s correct location.
Wear a grounding strap during this procedure to prevent electrical discharge.