Справочник Пользователя для Adtran L768

Скачать
Страница из 145
Chapter 3: Terminal Menu Operation and Structure
61202192L1-1
Express L768/L1.5 User Manual
37
negotiate PPP IPCP to exchange IP packets.  However, if a device can only sup-
port PPP BCP, IP packets are encapsulated by the device as bridge packets.  
The Express L768/L1.5 can treat the WAN IP Bridge as a virtual Ethernet port 
connected only to a WAN device which has negotiated PPP BCP.  This menu 
allows the IP parameters for this virtual Ethernet to be set up.
WAN IP Bridge/Network
Write security: 2; Read security: 5
This is the IP address of the virtual Ethernet port.
WAN IP Bridge/Netmask
Write security: 2; Read security: 5
This is the network mask to be applied to the virtual Ethernet port.
WAN IP Bridge/Triggered
Write security: 2; Read security: 5
When set to Yes, only IP RIP updates are sent when the routing table has  
changed.  When set to No (def), updates are sent periodically.  
RIP version, method,  and direction are determined by the Ethernet parameters set in 
the Configuration/IP/IP Router/RIP menu.
WAN IP Bridge/Proxy ARP
If this option is set to Yes (def), the Express L768/L1.5 will proxy ARP on the 
bridge IP port. See the section IP/Proxy ARP on page 32 for an explanation of 
the proxy ARP function.
Bridge/WAN IPX Bridge
When IPX routing is active, the Express L768/L1.5 will allow another WAN 
device to bridge IPX packets to it using PPP BCP.  Normally, two IPX routers 
would negotiate PPP IPXCP to exchange IPX packets.  However, if a device 
can only support PPP BCP, IPX packets are encapsulated by the device as 
bridge packets.  The Express L768/L1.5 can treat the WAN IPX Bridge as a vir-
tual Ethernet port connected only to a WAN device which has negotiated PPP 
BCP.  This menu allows the IPX parameters for this virtual Ethernet to be set 
up.