Справочник Пользователя для Motorola WPS870G

WPS870G 

 

PAGE 10 

Inferring an IP Address 

Using the example above, 192.168.10.10 is the IP address assigned to your Ethernet 
adapter. This tells you that you should assign an IP address beginning with 192.168.10.x. 
The last number, possibly 11 in this case, could be free.  

Use the ping command (just like using ipconfig – see above) to verify if the address is 
free, type ping 192.168.10.11.  

If you do not see the word “reply,” then most likely the IP address is free.  

For the following reasons, the above instruction might not work: 
•  You may have two network adapters installed in the computer, so you need to know which one is being 

•  You statically assigned your Ethernet adapter’s IP address and it is not the same as the router’s network. In 

If you chose to dynamically assign an IP address to your WPS870G, follow the Wireless 
Router connection procedure. If you chose static IP assignment, either hardware 
connection procedure can work. 

Wireless Router to WPS870G Connection 

If you decided to dynamically assign an IP address, use this procedure for connecting your 
hardware: 

LAN

4

WAN

3

2

1

Antenna

Reset

Power

Ethernet cable

WPS870G

To power

To power

Wireless Router

To modem

  

Using an Ethernet cable, take one end and plug it into one of the LAN Ethernet ports 
(not WAN) on the back of your router.