Справочник Пользователя для Motorola WPS870G
WPS870G
User Guide
PAGE 40
The printers attached to the WPS870G are displayed along with basic information.
Click Refresh to update the status of the printers.
Network Settings
Network Settings allows you to change how you want to log on to the WPS870G.
Network Setting
Click Network Settings to access the window. The Network Settings window is displayed:
You have two options at this point, either DHCP or Set IP Address. If you are using a router
with a DHCP server that has assigned an IP address to the WPS870G, then select DHCP.
Motorola recommends this approach because there is less management involved.
with a DHCP server that has assigned an IP address to the WPS870G, then select DHCP.
Motorola recommends this approach because there is less management involved.
Otherwise, select Set IP Address and type the necessary information.
Item Description
IP Address
Type the IP address you want to assign to the WPS870G. If you
require assistance in determining a static IP address, refer to
require assistance in determining a static IP address, refer to
Subnet Mask
A subnet mask specifies a particular IP network or a host within a
sub-network. If you have a router, type the Subnet mask for the
segment to which the Wireless Print Server is attached, most likely
255.255.255.0.
sub-network. If you have a router, type the Subnet mask for the
segment to which the Wireless Print Server is attached, most likely
255.255.255.0.