Справочник Пользователя для Motorola 57976500400

Please visit 

www.motorola.com/us/support

 for FAQs and additional product documentation.

Use the Connection page to change the way you connect to your Internet Service Provider (ISP). You should only change these settings when your ISP 
requires it. 

: always remember to click Apply Changes to make sure your updates are saved.

™

: If this check box is selected (default setting), your 2247-N8 will use automatic rate adaptation, which tries to sync at 

the fastest possible modulation.

™

: If this check box is selected (default setting), your 2247-N8 will attempt to detect the virtual circuit pairs in use by 

trying the most common settings until one is found. Thereafter, the 2247-N8 will always attempt to use that pair. If the 2247-N8 cannot 
detect the VPI/VCI set in use, you can clear the check box, and enter the values manually. VPI 0 and VPI 35 and VPI 8 and VCI 35 are the most 
common virtual circuit pairs used. Always try auto-detection first and then contact your service provider if another value is required.

™

: ether-llc (this is the only option)

™

: Point to Point Protocol over Ethernet (PPPoE) is the most commonly used configuration by DSL service providers. To use PPPoE, 

select the check box, enter the information below, and click 

.

Š

Š

Š

Š

 - Select always-on (default) to make sure your 2247-N8 is always connected to the Internet. If you choose on-demand, 

your 2247-N8 will establish a connection to the Internet only when a request is made from your home network. You can use the User