Справочник Пользователя для Netopia 3300-ENT

You can specify the IP addresses you want to expose by selecting Add Exposed Address List and pressing 
Return. The Add Exposed Address List screen appears.

Add, Edit, or delete exposed addresses options are active only if NAT is disabled on an WAN inter face. The 
hosts specified in exposed addresses will be allowed to receive inbound traffic even if there is no 
corresponding outbound traffic.

Start Address: Star t IP Address of the exposed host range.

End Address: End IP Address of the exposed host range

                               Add Exposed Address List

         Exposed Address List Name:       my_xposed_addr_list

Return accepts * ESC cancels * Left/Right moves insertion point * Del deletes.

                          Change Exposed Address Range ("my_xposed_list")

         First Exposed Address:             192.168.1.10

         Last Exposed Address:            +-------------+
                                          +-------------+
         Protocol...                      | TCP and UDP |
                                          | TCP         |
         Port Start:                      | UDP         |
                                          | ANY         |
         Port End:                        +-------------+

         CHANGE EXPOSED ADDRESS RANGE       CANCEL