Справочник Пользователя для Motorola 7.7.4
159
Status Indicator Lights
LED Function Summary Matrix
If a status indicator light does not look correct, look for these possible problems:
Power
DSL
Internet
Ethernet Wireless
Unlit
No power
No signal
No signal
No signal
No signal
Solid
Green
Green
Power on
Internet con-
nection is
established.
nection is
established.
Router is con-
nected.
nected.
Synched with
Ethernet card
Ethernet card
Synched with
WLAN
WLAN
Flashing
Green
Green
N/A
Activity on the
DSL cable
DSL cable
Transmitting
or receiving
data.
or receiving
data.
Activity on the
Ethernet
cable
Ethernet
cable
Activity on the
WLAN
WLAN
Red
Updating
embedded
software, or
for system
failure.
embedded
software, or
for system
failure.
N/A
N/A
Bad userid
and pass-
word are
entered.
and pass-
word are
entered.
N/A
If LED is
not Lit
Possible problems
Power
•
Make sure the power switch is in the ON position.
•
Make sure the power adapter is plugged into the DSL Router properly.
•
Try a known good wall outlet.
•
Replace the power supply and/or unit.
DSL
•
Make sure that any telephone has a microfilter installed.
•
Make sure the you are using the correct cable. The DSL cable is the thinner standard tele-
phone cable.
phone cable.
•
Make sure the DSL cable is plugged into the correct wall jack.
•
Make sure the DSL cable is plugged into the DSL port on the DSL Router.
•
Make sure the DSL line has been activated at the central office DSLAM.
•
Make sure the DSL Router is not plugged into a micro filter.
•
Launch a browser and try to browse the Internet. If the DSL Active light still does not flash,
then proceed to Advanced Troubleshooting.
then proceed to Advanced Troubleshooting.