Справочник Пользователя для Motorola 7.7.4
288
VLAN Settings
You can create up to 8 VLANs, and you can also restrict any VLAN, and the computers on it,
from administering the Gateway. See
from administering the Gateway. See
for more information.
set vlan name
name
Sets the descriptive name for the VLAN. If no name is specified, displays a selection list of
node names to select for editing. Once a new VLAN name is specified, presents the list of
VLAN characteristics to define.
node names to select for editing. Once a new VLAN name is specified, presents the list of
VLAN characteristics to define.
set vlan name
name type [ by-port | global ]
Specifies VLAN
type: by-port or global. Default is by-port.
set vlan name
name id VID
Specifies VLAN
id (VID), when type is set to global. The numerical range of possible VIDs
is 1 - 4094. (A VID of zero (0) is permitted on the Ethernet WAN por t only.)
set vlan name
name admin-restricted [ off | on ]
Turns
admin-restricted off or on. Default is off. If you select on, administrative access to
the Gateway is blocked from the specified VLAN.
set vlan name
name seg-pbits [ 0 - 7 ]
Specifies the 802.1p priority bit. If you set this to a value greater than 0, all packets of this
VLAN with unmarked priority bits (pbits) will be re-marked to this priority.
VLAN with unmarked priority bits (pbits) will be re-marked to this priority.
set vlan name
name ports port option [ off | on ]
Enables or disables the Gateway’s physical Ethernet, USB or VCC
port or wireless SSID for
the specified VLAN.