Листовка для Netopia 2241N-VGX

 

1.

 

Put the Gateway in a location where air can circulate freely around it.

 

2.

 

Then, plug the power supply into an electrical outlet. Turn on the Power switch. 

The 

 

 light should light solid green.

 

3.

 

The Netopia Installation Guide Wizard automates several tasks to get you up and running easily. You can 

run the Wizard on every Windows-based PC that will connect to your network.

The Installation Guide Wizard will run automatically and step through your connection installation(s).

The Installation Guide Wizard lets you choose which type 

of Netopia device you are installing, and where you are 

installing it. Choose either 

 

 or 

 

. The Netopia Installation 

Guide Wizard will install USB drivers if you choose the 

USB option.

Click the 

 

 button.

Follow the on-screen instructions to make all of your connections.

Be sure to configure each computer connected to your Netopia Gateway to accept a Dynamically-assigned IP 
address, commonly referred to as DHCP.

2

3

DSL

POWER

OFF

ON

ETHERNET

RESET

USB

 when power is on. 

 if device malfunctions.

Solid 

 when connected. Flashes 

 when there 

is activity on the LAN.

Solid 

 when connected. Flashes 

 when there 

is activity on the LAN.

Solid 

 when Internet connection is established.

Solid 

 when Gateway is connected. Flashes 

 

when transmitting or receiving data on the WAN port.

When all of your connections are made, 

your connections should look like this:

2

2