Справочник Пользователя для Adtran 4120

Chapter 3.  Terminal Menu Operation and Structure

61200176L3-1

Express 4110/4120 User Manual

3-19

Write security: 3; Read security: 5

This is the IP address of a web server on the Ethernet network.  When an 
active NAT connection is made to the Internet, any HTTP, FTP, or Mail 
server requests from the WAN are translated and sent to this web server.

The Domain Name Server parameters used by the Express 4110/4120 are 
specified here. The DNS server addresses can be exchanged between PPP 
peers. When a connection occurs and IPCP is negotiated, the Express 
4110/4120 will get the DNS server addresses from the PPP peer. If the 
configured DNS server addresses (Server 1 and Server 2) are all zeros, 
the addresses from the PPP peer are used. In NAT mode, the PPP peer’s 
DNS addresses are always used. The DNS addresses set in Server 1 and 
Server 2

 are offered to a PPP peer if so requested.

Write security: 3; Read security: 5

This is a text string used to represent the domain name used by the 
Express 4110/4120.

Write security: 3; Read security: 5

This is the IP address for the primary DNS device.  It is the first server 
that domain name requests are sent.

Write security: 3; Read security: 5

This is the IP address for the secondary DNS device.  It is used a back-up 
in case the primary address does not respond to the request.

The Express 4110/4120 can be configured as a relay agent for UDP broad-
cast packets.  Normally, a router will not forward UDP broadcast packets.  
However, many network applications use UDP broadcasts to configure 
addresses, host names, and other information. If hosts using these proto-