Справочник Пользователя для Netopia 4522 T1

 

.

1.

Connect the mini-DIN8 connector from the power adapter to the power por t, and plug the other end into an 
electrical outlet.

2.

Connect one end of the Categor y 5 cable to the T1 por t, and the other end to your T1 wall outlet.

3.

Connect the Ethernet cable to the Ethernet por t on the router and the other end to your computer.

You should now have: the power adapter plugged in; the Ethernet cable connected between the router and 
your computer; and the T1 cable connected between the router and the T1 wall outlet.

 

Port

Description

 

T1 WAN por t

An RJ-48 jack labeled WAN for your T1 connection.

Ethernet por t

RJ-45 10/100Base-T Ethernet jack. You will use this to configure the Netopia 4522. For 
a new installation, use an Ethernet connection. Alternatively, you can use the console 
connection to run console-based management using a direct serial connection. You can 
either connect your computer directly to the Ethernet por t using a crossover Ethernet 
cable (not supplied), or connect both your computer and the Netopia 4522 to an existing 
LAN environment.

Console por t

A DB-9 console por t for a direct serial connection to the console screens. You can use 
this if you are an experienced user. See 

.

Power por t

A mini-DIN8 power adapter cable connection.