Справочник Пользователя для Netopia 3347W

3.

If you selected PPP data link encapsulation in the DSL Line Configuration screen, a PPP Authentication 
menu item appears. The authentication protocol and user name/password combinations you enter must 
be assigned or agreed to in advance between you and your ISP. Select PPP Authentication and press 
Return.

From the pop-up menu that appears, select the authentication method your ISP uses: PAP (Password 
Authentication Protocol), CHAP (Challenge Handshake Authentication Protocol), or None.

PAP is the most common, and requires you to enter a User Name and Password in the next two fields.

CHAP requires you to enter a Host Name and Secret in the next two fields.

4.

Press the Down arrow key until you reach NEXT SCREEN. Press Return to bring up the next screen.

The IP Easy Setup screen is where you enter information about your Netopia Router’s:

Ethernet IP address 

Ethernet Subnet mask

Domain Name

Domain Name Ser ver IP address

Default gateway IP address

Consult with your network administrator to obtain the information you will need. For more information about 
setting up IP, see the Firmware User’s Guide chapter on “IP Setup”.

1.

Select Ethernet IP Address and enter the first IP address from the IP address range your ISP has given you 
only if you are not using Network Address Translation (NAT). This will be the Netopia Router’s IP address.

The Ethernet IP Address defaults to an address (192.168.1.1) within a range reser ved by the Internet 
address administration authority for use within private networks.

                              IP Easy Setup

         Ethernet IP Address:               192.168.1.1
         Ethernet Subnet Mask:              255.255.255.0

         Domain Name:                       isp.net
         Primary Domain Name Server:        209.3.224.21
         Secondary Domain Name Server:      209.3.224.20

         Default IP Gateway:                127.0.0.2

         IP Address Serving:                On

         Number of Client IP Addresses:     100
         1st Client Address:                192.168.1.100

         PREVIOUS SCREEN                    NEXT SCREEN

Enter an IP address in decimal and dot form (xxx.xxx.xxx.xxx).
Set up the basic IP & IPX attributes of your Netopia in this screen.