Справочник Пользователя для Netopia 4000-Series

Typically, you will have a Connection Profile that you created in Easy Setup. You may have more. Select the 
Connection Profile that you want to use from the Display/Change Connection Profile menu, and then select IP 
Profile Parameters.

By default, Multicast For warding is turned off (None) on Connection Profiles until you enable a specific 
Connection Profile to receive multicast data. You enable it by selecting Rx. from the pull-down menu.

                            IP Profile Parameters

         Address Translation Enabled:       Yes
         IP Addressing...                   Numbered

         NAT Map List...                    Easy-PAT List
         NAT Server List...                 Easy-Servers

         Local WAN IP Address:              0.0.0.0
         Local WAN IP Mask:                 0.0.0.0
         Remote IP Address:                 0.0.0.0
         Remote IP Mask:                    0.0.0.0

         Filter Set...                    +----------------+
         Remove Filter Set                +----------------+
                                          | None           |
                                          | Rx.            |
                                          +----------------+
         Multicast Forwarding...
         RIP Profile Options...