Справочник Пользователя для Netopia 4000-Series

To add a new Frame Relay DLCI, select Add DLCI in the Frame Relay DLCI Configuration screen and press 
Return. The Add DLCI screen appears.

1.

Select DLCI Name and enter a name for this individual Frame Relay DLCI profile. It can be any name you 
want. For example: the name of your ISP or remote branch you’re connecting to such as the corporate 
headquar ters of your company.

Note: The Netopia Router allows Frame Relay DLCIs to be named, so that you can easily reference and 
differentiate them. This is accomplished by giving a DLCI Name to a DLCI Number.

2.

Select DLCI Enabled and toggle it to Yes to activate the profile. If you disable this profile, the Netopia 
Router will automatically disable and block access to a specific remote DLCI.

3.

Select DLCI Number (16-991) and enter a number for this individual DLCI. Check with your Frame Relay 
provider to find out what numbers are allocated for each of your DLCI profiles. The DLCI number range 
should fall within the range of 16-991.

4.

Select Remote IP Address and enter the remote IP address your ISP or network administrator gave you 
that represents the remote sites IP address for their router. Press Return.

If you selected Standard or Buffered as the Tx Injection Management type in the Frame Relay Configuration 
screen go to the next bulleted item below. If you selected None in the Frame Relay Configuration screen go to 
step 6.

Below the Remote IP Address field, the following Data Flow Parameters appear:

■

The CIR (Committed Information Rate) represents the average capacity available to a given PVC (Per-
manent Vir tual Circuit) or DLCI (Data Link Connection Identifier). The setting defaults to 64000, but 
you may modify the capacity rate by toggling the selection in the Use Default field to No. You can then 
enter a different capacity rate in the Value field.

■

The Bc (Committed Burst Size) represents the maximum amount of data that your Frame Relay ser vice 

                                   Add DLCI

         DLCI Name:                         DLCI 16

         DLCI Enabled:                      Yes

         DLCI Number (16-991):              16

         Remote IP Address:                 0.0.0.0

         Data Flow Parameters---------------Use Default---------Value----
         CIR:                               Yes
         Bc:                                Yes
         Be:                                Yes

         ADD DLCI NOW                       CANCEL

Return accepts * ESC cancels * Left/Right moves insertion point * Del deletes.
Here you configure the parameters for a single DLCI (Data Link Circuit ID).