Справочник Пользователя для Netopia 4000-Series

Select Network Address Translation (NAT) and press Return.

The Network Address Translation screen appears.

Public Range defines an external address range and indicates what type of mapping to apply when using this 
range. The types of mapping available are dynamic, static and pat. 

Map Lists define collections of mapping rules. A rule maps interior range addresses to exterior range 
addresses by the mapping techniques defined in the map list. 

Server Lists bind internal IP addresses and por ts to external IP addresses and por ts so that connections 
initiated from the outside can access an interior ser ver. 

                                  IP Setup

         Ethernet IP Address:               192.168.1.1
         Ethernet Subnet Mask:              255.255.255.0
         Define Additional Subnets...

         Default IP Gateway:                127.0.0.2

         Primary Domain Name Server:        0.0.0.0
         Secondary Domain Name Server:      0.0.0.0
         Domain Name:                       isp.com

         Receive RIP...                     Both
         Transmit RIP...                    Off

      Static Routes...                         IP Address Serving...
      Network Address Translation (NAT)...

Set up the basic IP attributes of your Netopia in this screen.

                          Network Address Translation

                     Add Public Range...
                     Show/Change Public Range...
                     Delete Public Range...

                     Add Map List...
                     Show/Change Map List...
                     Delete Map List...

                     Add Server List...
                     Show/Change Server List...
                     Delete Server List...

                     NAT Associations...

Return/Enter to configure IP Address redirection.