Справочник Пользователя для Netopia 4000-Series
4-4 Firmware User Guide
About PPTP Tunnels
To set up a PPTP tunnel, you create a Connection Profile including the IP address and other relevant information
for the remote PPTP par tner. You use the same procedure to initiate a PPTP tunnel that terminates at a remote
PPTP ser ver or to terminate a tunnel initiated by a remote PPTP client.
for the remote PPTP par tner. You use the same procedure to initiate a PPTP tunnel that terminates at a remote
PPTP ser ver or to terminate a tunnel initiated by a remote PPTP client.
PPTP configuration
To set up the router as a PPTP Network Ser ver (PNS) capable of answering PPTP tunnel requests you must also
configure the VPN Default Answer Profile. See
configure the VPN Default Answer Profile. See
for more information.
PPTP is a Datalink Encapsulation option in Connection Profiles. It is not an option in device or link configuration
screens, as PPTP is not a native encapsulation. Consequently, the Easy Setup Profile does not offer PPTP
datalink encapsulation. See the
screens, as PPTP is not a native encapsulation. Consequently, the Easy Setup Profile does not offer PPTP
datalink encapsulation. See the
for information on creating
Connection Profiles.
Channel 4 (and higher) events, such as connections and disconnections, repor ted in the WAN Event Histories
are VPN tunnel events.
are VPN tunnel events.
To define a PPTP tunnel, navigate to the Add Connection Profile menu from the Main Menu.
Main
Menu
WAN
Configuration
Add Connection
Profile
Add Connection Profile
Profile Name: Profile 1
Profile Enabled: +---------------+
+---------------+
Data Link Encapsulation... | PPP |
| Frame Relay |
| RFC1483 |
| ATMP |
IP Profile Parameters... | PPTP |
| IPsec |
+---------------+
Profile Enabled: +---------------+
+---------------+
Data Link Encapsulation... | PPP |
| Frame Relay |
| RFC1483 |
| ATMP |
IP Profile Parameters... | PPTP |
| IPsec |
+---------------+
COMMIT CANCEL