Справочник Пользователя для Netopia R3100

director y number to use and what kind of transmission ser vice to use.

To configure telephone connections:

1.

For Inbound Directory Number 1 Connection, press Return and choose one of the following selections 
from the pop-up menu:

■

Reject as Busy blocks calls, issuing a busy tone to the par ty tr ying to dial in.

■

Phone 1 directs calls out the Netopia Router’s Phone 1 jack, ringing the phone or device plugged into 
that jack.

■

Phone 2 directs calls out the Netopia Router’s Phone 2 jack, ringing the phone or device plugged into 
that jack.

■

Phone 1 & Phone 2 rings all devices connected to the Phone 1 and Phone 2 jacks.

■

Router directs the incoming call, usually a data-over-voice call with a speech or 3.1 kHz ser vice, 
internally for the Router’s use.

2.

For Inbound Directory Number 2 Connection, press Return and configure as described in step 1. If no 
number is entered for Director y Number 2 in the initial configuration, the option you select is stored but not 
used.

3.

For Outbound Phone 1 Connection, press Return and choose one of the following selections from the 
pop-up menu:

■

Blocked prevents outbound calls on that jack. Devices on that line hear a busy signal. Inbound calls 
are still possible, depending on how the Netopia Router is configured in steps 1 and 2.

■

Directory Number 1 routes the outbound call out the number specified by Director y Number 1. This 
ensures that the call is made from the director y number you choose. 

■

Directory Number 2 routes outbound calls out the number specified by Director y Number 2.

■

Either routes outbound calls out either Director y Number 1 or Director y Number 2, depending on 
which is available, if either.

4.

For Outbound Phone 1 Service Grade, press Return and choose one of the following selections from the 
pop-up menu: 

■

Speech for typical speech grade ser vice used in telephone conversations.

■

3.1 kHz Audio for a higher grade of ser vice that ensures better line conditions for data transfer such 
as for a facsimile machine or modem.

Note: The 3.1 kHz ser vice may not be available from your ISDN ser vice provider, and there may be 
higher tariffs for its use. Check with your ISDN ser vice provider about the availability of this ser vice 
grade.

5.

For Outbound Phone 2 Connection, press Return and configure as described in step 3.

6.

For Outbound Phone 2 Service Grade, press Return and configure as described in step 4.