Справочник Пользователя для Netopia R3100

Press the Escape key when you are finished configuring Expor ted Ser vices to go back to the IP Setup 
screen.

Follow these steps to configure IP Setup for your Netopia R3100:

■

Select Ethernet IP Address and enter the IP address for the Netopia R3100’s Ethernet por t.

■

Select Ethernet Subnet Mask and enter the subnet mask for the Ethernet IP Address that you entered in 
the last step.

■

Select Default IP Gateway and enter the IP address for a default gateway. This can be the address of any 
major router accessible to the Netopia R3100 such as 127.0.0.2.

A default gateway should be able to successfully route packets when the Netopia R3100 cannot recognize 
the intended recipient’s IP address. A typical example of a default gateway is the a corporate dial-in or 
ISP’s router.

■

Select DNS Server and enter the IP address for a domain name ser ver. The domain name ser ver matches 
the alphabetic addresses favored by people (for example, www.netopia.com) to the IP addresses actually 
used by IP routers (for example, 163.7.8.202). 

■

If a secondar y DNS ser ver is available, select Secondary DNS Server and enter its IP address. The 
secondar y DNS ser ver is used by the Netopia R3100 when the primar y DNS ser ver is inaccessible. 
Entering a secondar y DNS is useful but it is not necessar y.

■

Select Domain Name and enter your network’s domain name (for example, netopia.com). Entering a 
Domain Name is strongly recommended.

■

Routing Information Protocol (RIP) is needed if there are IP routers on other segments of your Ethernet 
network that the Netopia R3100 needs to recognize. Set to “Both” (the default)  the Netopia R3100 will 
accept information from either RIP v1 or v2 routers. Alternatively, select Receive RIP and select v1 or v2  
from the popup menu. With Receive RIP set to “v1,” the Netopia R3100’s Ethernet por t will accept routing 
information provided by RIP packets from other routers that use the same subnet mask. Set to “v2,” the 

                                  IP Setup

         Ethernet IP Address:               192.168.6.137
         Ethernet Subnet Mask:              255.255.255.248

         Default IP Gateway:                0.0.0.0

         DNS Server:                        0.0.0.0
         Secondary DNS Server:              0.0.0.0
         Domain Name:

         Receive RIP:                       Both
         Transmit RIP:                      Off

         Static Routes...

Set up the basic IP attributes of your Netopia in this screen.