Справочник Пользователя для Netopia R3100

■

To delete an AURP par tner, select Delete Partner in the AURP Setup screen and press Return to display a 
table of existing par tners.

Use the Up and Down Arrow keys to select an AURP par tner, then press Return to delete it. Press the 
Escape key to exit without deleting a par tner.

■

To control the acceptance of incoming AURP tunnels, select Accept Connections From and choose Anyone 
or Configured Partners Only from the pop-up menu. If you choose Anyone, all incoming AURP connections 
will be accepted. 

The more secure option is Configured Partners Only, which only accepts connections from recognized 
AURP par tners (the ones you have set up).

In the AURP Setup screen, Select AURP Options and go to the AURP Options screen. Using AURP can cause a 
problem when two networks, one local and one remote, have the same network number. This may cause 
network routing ambiguities than can result in routing errors.

■

Select Tickle Pkt Rqst Interval (HH:MM:SS) and set the timer to indicate how often a tickle or ‘are you 
still there’ packet will be sent to the remote AppleTalk Network.

The AURP tickle timer is a parameter that you can set anywhere between 0 and 100 hours. This parameter 
tells the AURP par tners when to send out an AURP tickle packet. If this value is set to 0, the Netopia 
R3100 will never send out a tickle packet. Tickle packets verify that the remote router is working. The 
minimum tickle inter val is 90 seconds. The maximum tickle inter val setting is 99:59:59 (100 hours), which 
is the recommendation for small networks.

                                  AURP Options

         Tickle Interval (HH:MM:SS):             00:00:00
         Update Interval (HH:MM:SS):             00:00:30

         Enable Network Number Remapping:        Yes

         Remap into Range
                     From:                       4096
                     To:                         32768

         Cluster Remote Networks:                No

         Enable Hop-Count Reduction:             No

Return accepts * ESC cancels * Left/Right moves insertion point * Del deletes.