Справочник Пользователя для Netopia R3100

The IP Easy Setup screen is where you enter information about your Netopia Router’s:

■

IP address 

■

Subnet mask

■

Default gateway IP address

■

Domain name ser ver IP address

■

IP address ser ving information, such as the number of client IP addresses and the 1st client address; and

You should consult with your network administrator to obtain the information you will need. For more information 
about setting up IP, see 

.

1.

Select Ethernet IP Address and enter the first IP address from the IP address range your ISP has given 
you. This will be the Netopia Router’s IP address.

If Network Address Translation is enabled in the Easy Setup connection profile, the Ethernet IP Address 
defaults to an address within a range reser ved by the Internet address administration authority for use 
within private networks, 192.168.1.1.

Because this is a private network address, it should never be directly connected to the Internet. Using NAT 
for all your connection profiles will ensure this restriction. See 

 of this guide for more information.

2.

Select Ethernet Subnet Mask and enter the subnet mask your ISP has given you. The Ethernet Subnet 
Mask defaults to a standard class C mask, 255.255.255.0.

3.

Select Domain Name and enter the domain name your ISP has given you.

4.

Select Primary Domain Name Server and enter the IP address your ISP has given you.

                              IP Easy Setup

         Ethernet IP Address:               192.168.1.1
         Ethernet Subnet Mask:              255.255.255.0

         Domain Name:
         Primary Domain Name Server:        192.168.1.10
         Secondary Domain Name Server:      0.0.0.0

         Default IP Gateway:                0.0.0.0

         IP Address Serving:                On

         Number of Client IP Addresses:     100
         1st Client Address:                192.168.1.3

         PREVIOUS SCREEN                    NEXT SCREEN

Enter an IP address in decimal and dot form (xxx.xxx.xxx.xxx).
Set up the basic IP & IPX attributes of your Netopia in this screen.