Справочник Пользователя для Netcomm 802.11

802.11n Wireless Router

MAC Filter

If you want to restrict users from accessing certain Internet applications / services (e.g. Internet websites, email, 
FTP etc.), and then this is the place to set that configuration. Access Control allows users to define the traffic type 
permitted in your LAN. You can control which PC client can have access to these services.

Enable MAC Filtering: Check to enable or disable MAC Filtering.

Deny: If you select “Deny” then all clients will be allowed to access Internet except for the clients in the list below.

Allow: If you select “Allow” then all clients will be denied to access Internet except for the PCs in the list below.

Add PC MAC Address
Fill in “LAN MAC Address” and <Description> of the PC that is allowed to access the Internet, and then click 
<Add>. If you find any typo before adding it and want to retype again, just click <Reset> and the fields will be 
cleared.

Remove PC MAC Address 
If you want to remove some PC from the “MAC Filtering Table”, select the PC you want to remove in the table and 
then click <Delete Selected>. If you want to remove all PCs from the table, just click the <Delete All> button. If 
you want to clear the selection and re-select again, just click <Reset>.

Click <Apply> at the bottom of the screen to save the above configurations.