Справочник Пользователя для Multi-Tech Systems MTCBA-H3-EN3
Chapter 3 – Using the Web Management Software
Multi-Tech Systems, Inc. MultiModem rCell User Guide
44
5.
Click Save and Restart once you have completed and submitted all the screens on which you have made
changes.
changes.
Packet Filters > Advanced
Connection Tracking
H323:
Enable/disable the forwarding of H323 packets across the firewall. Default is disabled.
PPTP:
Enable/disable PPTP Packet Pass-through (PPTP NAT support). Default is disabled.
CMP Configuration
The Internet Control Message Protocol (ICMP) is used to test the network connections and the functionality of the
firewall and is also used for diagnostic purposes. ICMP on Firewall and ICMP Forwarding always apply to all IP
addresses; i.e., Any. When these are enabled, all IP hosts can Ping the firewall (ICMP on Firewall) or the network
behind it (ICMP Forwarding).
firewall and is also used for diagnostic purposes. ICMP on Firewall and ICMP Forwarding always apply to all IP
addresses; i.e., Any. When these are enabled, all IP hosts can Ping the firewall (ICMP on Firewall) or the network
behind it (ICMP Forwarding).
ICMP on LAN:
Enable/disable the transfer of ICMP packets on the LAN interface. Default is enabled.
ICMP on WAN:
Enable/disable the transfer of ICMP packets on the WAN interface. Default is enabled.
ICMP Forward:
Enable/disable the forwarding of ICMP packets through the firewall into the local
network. Default is enabled.
network. Default is enabled.