Справочник Пользователя для National Instruments WAP-3711

 

DHCP Server (AP/Bridge modes only) 

 

The NI WAP-3701/3711 can assign IP addresses to client computers automatically by DHCP. In 
this section of the management page, you can specify the Default gateway, Subnet mask, 
Primary DNS server, and Secondary DNS server settings that will be sent to a client at its 
request. Additionally, you can specify the first IP address that will be assigned to the clients and 
the number of IP addresses that can be allocated. 

NOTE 

There should only be one DHCP server on the LAN; otherwise, DHCP will not work properly. If 
a DHCP server is already connected to the LAN, disable the DHCP server functionality of the NI 
WAP-3701/3711. 
By default, the DHCP server function is disabled. 

 

IP addresses of servers are often static so that clients can always locate the servers by the static IP 
addresses. By using Static DHCP Mappings, you can ensure that a host will get the same IP 
address when it requests one from the DHCP server. Therefore, instead of configuring the IP 
address of an intranet server manually, you can configure the server to obtain an IP address by 
DHCP so that it is always assigned the same IP address.