Справочник Пользователя для Netopia R5300

The Telnet client mode replaces the normal menu mode. Telnet sessions can be cascaded, that is, you can 
initiate a Telnet client session when using a Telnet console session. To activate the Telnet client, select Telnet 
from the Utilities & Diagnostics menu.

The Telnet client screen appears.

■

Enter the host name or the IP address in dotted decimal format of the machine you want to Telnet into and 
press Return. 

■

Either accept the default control character “Q” used to suspend the Telnet session, or type a different one.

■

START A TELNET SESSION becomes highlighted. 

■

Press Return and the Telnet session will be initiated. 

■

To suspend the session, press Control-Q or whatever other control character you specified.

Two new options will appear in the Telnet screen (not shown):

Resume Suspended Session – select if you want to go back to your Telnet session

Terminate Suspended Session – select if you want to end the session

                                   Telnet

         Host Name or IP Address:

         Control Character to Suspend:      Q

                            START A TELNET SESSION

Enter the IP Address/Domain Name of a host.