Справочник Пользователя для Netopia R910

The Netopia R910 Router suppor ts the Point-to-Point protocol over Ethernet (PPPoE) for use of PPP to connect 
through a DSL or cable modem. Some ISPs require user name and password authentication to connect you with 
their DSL or cable ser vice. PPPoE allows user name and password authentication to the ISP via your R910’s 
Ethernet inter face to your DSL or cable modem. 

To configure PPP authentication in your R910, you first enable PPP over Ethernet and then create a Connection 
Profile for your Internet connection.

From the Main Menu select WAN Configuration, WAN Setup, and then EN (Wan Module 1) Setup. Press 
Return.

The WAN Ethernet Configuration screen appears.

Toggle Enable PPP over Ethernet to On, using the Tab key. Press Return, and then Escape twice to return to 
WAN Configuration. Select Add Connection Profile. Press Return.

The Add Connection Profile screen appears.

WAN Configuration

Main

Menu

EN (WAN Module 1)

WAN

Setup

Setup

                          WAN Ethernet Configuration

         Address Translation Enabled:       Yes
         Local WAN IP Address:              0.0.0.0

         NAT Map List...                    Easy-PAT List
         NAT Server List...                 Easy-Servers

         Filter Set...
         Remove Filter Set

         Receive RIP:                       Both

         Enable PPP over Ethernet:          On

         Wan Ethernet MAC Address:          00:00:c5:70:03:4a