Справочник Пользователя для Netopia R910

To add a new user account, select Add User in the Security Options screen and press Return. The Add Name 
With Write Access screen appears.

Follow these steps to configure the new account: 

1.

Select Enter Name and enter a descriptive name (for example, the user’s first name). 

2.

Select Enter Password and enter a password. 

3.

To accept the new name/password combination, select ADD NAME/PASSWORD NOW. To exit the Add 
Name With Write Access screen without saving the new account, select CANCEL. You are returned to the 
Security Options screen.

To delete a user account, select Delete User to display a list of accounts. Select an account from the list and 
press Return to delete it. To exit the list without deleting the selected account, press Escape.

Telnet is a TCP/IP ser vice that allows remote terminals to access hosts on an IP network. The Netopia R910 
suppor ts Telnet access to its configuration screens. 

You should consider password-protecting or restricting Telnet access to the Netopia R910 if you suspect there 
is a chance of tampering.

To password-protect the configuration screens, select Easy Setup from the Main Menu, and go to the Easy 
Setup Security Configuration screen. By entering a name and password pair in this screen, all access via 
serial, Telnet, SNMP, and Web ser ver will be password-protected.

To restrict Telnet access, select Security in the Advanced Configuration menu. The Security Options screen will 
appear. There are two levels of Telnet restriction available:

                           Add Name With Write Access

         Enter Name:

         Enter Password (11 characters max):

         ADD NAME/PASSWORD NOW              CANCEL