Справочник Пользователя для Netopia R910

Or, from the Main Menu, select Easy Setup. The Easy Setup WAN Ethernet Configuration screen appears.

Toggle Address Translation Enabled to Yes or No (Yes to enable NAT) and press Return.

For more information see 

4.

If your ISP uses numbered (inter face-based) routing, select Local WAN IP Address and enter the local WAN 
address your ISP gave you. Then select Local WAN IP Mask and enter the WAN subnet mask of the remote 
site you will connect to.

The default address is 0.0.0.0, which allows for dynamic addressing, meaning that your ISP assigns an 
address via DHCP each time you connect. However, if you want to use static addressing, enter a specific 
address.

                          WAN Ethernet Configuration

         Address Translation Enabled:       Yes
         Local WAN IP Address:              0.0.0.0

         TO MAIN MENU                       NEXT SCREEN

Set up the basic IP attributes of your Ethernet Module in this screen.