Справочник Пользователя для Netopia R5100

The following procedure describes how to use Network Address Translation.

1.

Pick a network number for your local network (referred to as the internal network). This can be any IP 
address range you want. The Netopia R5000 Series Router has a default IP address of 192.168.1.1. You 
may choose to change this address to match a pre-existing addressing scheme. For this example, we will 
use 10.0.0.0.

Note: The outside world (the external network) will not see this network number.

2.

Using the internal network number, assign addresses to the local nodes on your LAN. For example, you 
could assign

■

10.0.0.1 to your Netopia R5000 Series Router

■

10.0.0.2 to a node running as a World Wide Web ser ver

■

10.0.0.3 to an FTP ser ver

■

10.0.0.4 to a Windows NT PC

■

10.0.0.5 to a Windows 95 PC

Note: See 

3.

In the connection profile, toggle Address Translation Enabled to Yes or No (Yes to enable NAT) and press 
Return.

The Easy Setup connection profile is accessible by using either of the following two approaches:

■

From the Easy Setup menu in the Main Menu screen, select the next screen, Connection Profile 1: Easy 
Setup Profile.

The Easy Setup Profile screen appears.

                   Connection Profile 1: Easy Setup Profile

         Address Translation Enabled:       Yes
         IP Addressing...                   Numbered

         Local WAN IP Address:              163.176.107.2
         Local WAN IP Mask:                 255.255.255.0

         PREVIOUS SCREEN                    NEXT SCREEN

Toggle to Yes if this is a single IP address ISP account.
Enter basic information about your WAN connection with this screen.