Справочник Пользователя для Netopia R5100

Series Router’s EtherTalk Phase II por t is visible to other AppleTalk nodes. The default zone is also where 
new AppleTalk nodes will appear. If you do not set a default zone, the first zone you create will be the 
default zone.

■

You can also set the range of EtherTalk Phase II network numbers. Select Net Low and enter the lower limit 
of the network number range. Select Net High and enter the upper limit of the range.

■

Select the Seeding pop-up menu and choose the seeding method for the Netopia R5000 Series Router to 
use. (See 

You have finished configuring EtherTalk Phase II.

For instructions on making the physical connections for LocalTalk, see 

. 

In the AppleTalk Setup screen, select LocalTalk Setup and press Return. The LocalTalk Setup screen appears.

■

If you are using LocalTalk with the Netopia R5000 Series Router, select LocalTalk Enabled and make sure 
LocalTalk is set to On, which is the default.

Note: Since the LocalTalk connector attaches to the Auxiliar y por t on the router, that por t will no longer be 
available for a third external modem.

■

Select LocalTalk Zone Name and enter a new or existing zone name.

Note: Your LocalTalk network may already have a zone and network number in place. For the Netopia 
R5000 Series Router’s LocalTalk por t to be par t of your LocalTalk network, it must have a network number 
and zone name that matches the values in use on the LocalTalk network.

                                 LocalTalk Setup

         LocalTalk Enabled:                 On

         LocalTalk Zone Name:               Unnamed

         LocalTalk Net Number:              33126

         Seeding...                         Soft-Seeding

Use this screen to set up the LocalTalk Port Routing attributes.