Справочник Пользователя для Netopia R5100

If you chose PPP as your datalink encapsulation method, select PPP Authentication and from the pop-up 
menu choose: None (the default), PAP, CHAP, PAP-TOKEN, or CACHE-TOKEN. Selecting any authentication 
method other than the default None will display fields for you to enter your authentication information, such 
as User Name and Password.

5.

Select NEXT SCREEN and press Return. The IP Easy Setup screen appears.

Note: For more Easy Setup options, see the next section. For more Frame Relay configuration options see 

.

The IP Easy Setup screen is where you enter information about your Netopia Router’s:

■

Ethernet IP address 

■

Ethernet Subnet mask

■

Domain Name

■

Domain Name Ser ver IP address

■

Default gateway IP address

Consult with your network administrator to obtain the information you will need. For more information about 
setting up IP, see 

1.

Select Ethernet IP Address and enter the first IP address from the IP address range your ISP has given 
you. This will be the Netopia Router’s IP address.

If Network Address Translation is enabled in the Easy Setup connection profile, the Ethernet IP Address 
defaults to an address within a range reser ved by the Internet address administration authority for use 
within private networks, 192.168.1.1.

                              IP Easy Setup

         Ethernet IP Address:               192.168.1.1
         Ethernet Subnet Mask:              255.255.255.0

         Domain Name:
         Primary Domain Name Server:        0.0.0.0

         Default IP Gateway:                0.0.0.0

         IP Address Serving:                On

         Number of Client IP Addresses:     100
         1st Client Address:                192.168.1.100

         PREVIOUS SCREEN                    NEXT SCREEN

Enter an IP address in decimal and dot form (xxx.xxx.xxx.xxx).
Set up the basic IP & IPX attributes of your Netopia in this screen.