Справочник Пользователя для Netopia R7200

The current status section is a table showing the current status of the WAN. For example:

Profile Name: Lists the name of the connection profile being used, if any.

State: Lists the por ts in use for this connection.

%Use: Indicates the average percent utilization of the maximum capacity of the channels in use for the 
connection.

Remote Address: Shows the IP address of the connected remote router if the connection is using IP. 
Other wise, shows the IPX address of the connected remote router, if using IPX.

Est: Indicates whether the connection was locally (“Lcl”) or remotely (“Rmt”) established.

More Info: Indicates, in order of priority, the NAT address in use for this connection, the IPX address in use (if IP 
is also in use), or the ISDN caller identification (if available).

This section shows the current real-time status of the Netopia R7200’s status lights (LEDs). It is useful for 
remotely monitoring the router’s status. The Quick View screen’s arrangement of LEDs corresponds to the 
physical arrangement of LEDs on the router. 

Each LED representation can repor t one of four states:

–: The LED is off.

R: The LED is red.

G: The LED is green.

Y: The LED is yellow.

The section 

each LED.

                           Current DSL Status
     ---Profile Name------State---%Use-Remote Address----Est.-More Info----------
     ISP                   P1      10  IP 92.163.4.1      Lcl  NAT 192.163.100.6

-PWR-+-----WAN1------+--CON--AUX--+-----WAN2------+--EN--+--------LEDS---------
       LNK RDY CH1 Ch2   LNK  LNK   LNK RDY CH1 CH2  DATA | '-'= Off 'G'= Green
   G    -   G   -   -     Y    -     -   -   -   -    -   | 'R'= Red 'Y'= Yellow