Справочник Пользователя для Netopia R7200

 

For more information on Network Address Translation, see 

 

After your account is set up, the ISP should send you the IP parameter information that will help you configure 
the Netopia R7200.

 

Your ISP will need to provide you with the following information:

 

■

 

The default gateway IP address (same as remote IP address in most cases)

 

■

 

Local WAN IP address and subnet mask

 

■

 

Primar y and secondar y domain name ser ver (DNS) IP addresses

 

■

 

Domain name (usually the same as the ISP’s domain name unless you have registered for your own 
individual domain name)

 

Note:

 

The default gateway, WAN address and mask, DNS, and domain name are all obtainable via WAN DHCP, 

if your ISP suppor ts it.

 

If you are using Smar tIP (NAT), you should obtain the following:

 

■

 

If you are connecting to a remote site using Network Address Translation on your router, your provider will 
not define the IP address information on your local LAN. You can define this information based on an IP 
configuration that may already be in place for the existing network. Alternatively, you can use the default IP 
address range used by the router.

 

If you are not using Network Address Translation, you will need to obtain all of the local LAN IP address 
information from your ISP.

If you are not using Smar tIP (NAT), you should obtain:

 

■

 

The number of Ethernet IP host addresses available with your account and the first usable IP host address 
in the address block

 

■

 

The Ethernet IP address for your Netopia R7200

 

■

 

The Ethernet IP subnet mask address for your Netopia R7200