Справочник Пользователя для Netopia R5200

To modify a filter set, select Display/Change Filter Set in the Filter Sets screen to display a list of filter sets.

Select a filter set from the list and press Return. The Change Filter Set screen appears. The items in this 
screen are the same as the ones in the Add Filter screen (see 

).

Note: If you delete a filter set, all of the filters it contains are deleted as well. To reuse any of these filters in 
another set, before deleting the current filter set you’ll have to note their configuration and then recreate them.

To delete a filter set, select Delete Filter Set in the Filter Sets screen to display a list of filter sets.

Select a filter set from the list and press Return to delete it. Press Escape to exit the list without deleting the 
filter set.

This section contains the settings for a filter set called Basic Firewall, which is par t of the Netopia R5000 
Series Router’s factor y configuration.

Basic Firewall blocks undesirable traffic originating from the WAN (in most cases, the Internet), but for wards all 
traffic originating from the LAN. It follows the conser vative “that which is not expressly permitted is prohibited” 
approach: unless an incoming packet expressly matches one of the constituent input filters, it will not be 
for warded to the LAN.

                              Display/Change Filter Set...

         Filter Set Name:                   Filter Set  1

                     Add Input Filter to Filter Set...
                     Display/Change Input Filter...
                     Delete Input Filter...
                     Move Input Filter...

                     Add Output Filter to Filter Set...
                     Display/Change Output Filter...
                     Delete Output Filter...
                     Move Output Filter...