Справочник Пользователя для ALTINEX TNP151

400-0434-005

2

Please read this manual carefully before using 
your  Tilt ‘N Plug Jr. Interconnect Box. Keep this 
manual handy for future reference. These safety 
instructions are to ensure the long life of your 
Tilt ‘N Plug Jr. and to prevent fire and shock 
hazards. Please read them carefully and heed all 
warnings.

•

Unauthorized personnel shall not open the unit 
as there are high-voltage components inside.

•

Qualified ALTINEX service personnel or their 
authorized representatives must perform all 
service.

•

For best results, place the Tilt ‘N Plug Jr. in a 
dry area away from dust.

•

To prevent fire or shock, do not expose this unit 
to  water or moisture. Do not place the unit in 
direct sunlight, near heaters or heat-radiating 
appliances, or near any liquid. Exposure to 
direct sunlight, smoke, or steam can harm 
internal components.

•

Handle the Tilt ‘N Plug Jr. carefully. Dropping 
or jarring can damage the bezel.

•

Never place fingers inside the opening on either
side of the unit. This action could cause injury 
due to sharp edges inside.

•

Do not place heavy objects on top of the
Tilt ‘N Plug Jr. Do not use excessive force to 
push down on the top of the unit.

•

Disconnect the power cord to turn off the power. 
This supplies power to the socket on the pop-up 
panel. The power outlet should be installed near 
the equipment and be easily accessible.

•

We recommend using wall outlets with a 
Ground  Fault Circuit Interrupter (GFCI) for 
maximum protection.

•

Install all cables according to the instructions
found herein. Do not force or pull any cable that 
is attached to the Tilt ‘N Plug Jr.

•

Surfaces should be cleaned with a dry cloth. 
Never  use strong detergents or solvents such 
as alcohol or thinner. Do not use a wet cloth or 
water to clean the unit.

•

This device complies with Part 15 of the FCC 
Rules. Operation is subject to the following two 
conditions: (1) This device may not cause 
harmful interference, and (2) this device must 
accept any interference received, including 
interference that may cause undesired 
operation.

•

This equipment has been tested and found to 
comply with the limits for a Class A digital 
device, pursuant to Part 15 of the FCC Rules. 
These limits are designed to provide reasonable 
protection against harmful interference when 
the equipment is operated in a commercial 
environment. This equipment generates, uses, 
and can radiate radio frequency energy and, if 
not installed and used in accordance with the 
instructions found herein, may cause harmful 
interference to radio communications. Operation 
of this equipment in a residential area is likely to 
cause harmful interference in which case the 
user will be required to correct the interference 
at his expense.

•

Any changes or modifications to the unit not 
expressly approved by ALTINEX, Inc. could void 
the user’s authority to operate the equipment.