Справочник Пользователя для 3com SuperStack II

C

HAPTER

 9: C

USTOMIZING

 Y

OUR

 S

OFTWARE

When you define the name parameter, these error messages may be 
returned:

Rejected name - Contains invalid character(s)

Rejected name - Null string not allowed

Rejected name - It is already in use

Rejected name - Must start with alphabetic character

This section describes the autobaud  feature, which allows the 56/64 
Kbps CSU/DSU module to detect the baud rate automatically.

The two ports of the end bridge/routers must be configured to the same 
port owners to allow the data link such as PPP to come up at the correct 
baud rate. 

The default setting is Autobaud ON.

You can turn off autobaud by setting the baud rate. For example, to set 
the baud rate to 64 K, enter:

The autobaud feature is turned off and the CSU/DSU module is set to the 
defined baud rate only. This terminates any autobaud that has already 
started.

To turn on autobaud by setting the baud rate to auto, by entering:

This example sets up a 56/64 Kbps CSU/DSU module to communicate 
with the central site NETBuilder router whose baud rate is already 
configured.

1 Configure the remote site router to the same identical port owner as the 

central site router.

2 To turn the autobaud feature on at the 56/64 Kbps CSU/DSU module, 

enter: