Справочник Пользователя для 3com SuperStack II
Mounting the Bridge/Router
33
Installing in a Rack
To install the bridge/router in a rack, follow these steps:
CAUTION: Do not restrict air flow around the sides and back of the
bridge/router.
bridge/router.
1 Secure the rack-mount brackets to each side of the chassis using two
flathead screws per bracket.
2 Hold the chassis between the poles of the rack and attach the brackets to
the rack using panhead screws (you must provide these screws). Tighten
each screw securely.
each screw securely.
CAUTION: Using fewer than two screws to secure the brackets to the
rack may cause the boundary router to fall and sustain damage not
covered by the warranty.
rack may cause the boundary router to fall and sustain damage not
covered by the warranty.