Справочник Пользователя для 3com SuperStack II

You must attach a console to the bridge/router for initial software 
configuration. For information about attaching a PC, terminal, or 
modem, see the hardware installation guide for the bridge/router.

After you have configured the software, you can access the user interface 
using one of the following methods:

■

Telnet to the bridge/router from a device (for example, a workstation) 
on the same extended network or internetwork.

The software supports Transmission Control Protocol (TCP) and User 
Datagram Protocol (UDP). These protocols allow you to Telnet to the 
bridge/router using an Internet Protocol (IP) address. For more 
information about using Telnet on a workstation, see the manual that 
came with your Telnet application.

■

Use Simple Network Management Protocol (SNMP) to view and 
configure a subset of the parameters from a remote host. For 
information on preparing the bridge/router to run SNMP, see Using 
Enterprise OS Software.

When your bridge/router starts up, it takes a few minutes to complete the 
initialization process. While the bridge/router is initializing, several 
messages appear on your terminal. The bridge/router has finished 
booting when the following message is displayed:

System Initialized and Running 

To log on, follow these steps:

1 Press any key on the keyboard.

The following prompt is displayed:

NetLogin:

2 Enter:

Root is the default account name. The following prompt is displayed:

Password:

3 Press the Return key.

Pressing the Return key enters a null string, which is the default local 
password. The Network Manager prompt is displayed:

Enterprise OS 

#